| Author |
 Topic  |
|
|
Rob
USA
2615 Posts |
 Posted - 06/22/2012 : 15:52:26
|
**********************************************************
This is a TEST release, use at your own risk and make sure to back up your StrokesPlus.xml file. If you're new to S+, install 2.0.3 first, then replace the EXE and DLL with the contents of this release.
**********************************************************
32-bit:
Portable/ZIP Download - Changed Files Only:
http://www.strokesplus.com/files/StrokesPlus_2.0.7_x86_chg.zip
64-bit:
Portable/ZIP Download - Changed Files Only:
http://www.strokesplus.com/files/StrokesPlus_2.0.7_x64_chg.zip
Change Log:
2.0.7 (Test)
- Releasing this is a test build since the last couple were plagued with problems
- Multiple changes to hopefully address stability/usability issues
2.0.6 (Beta)
- If S+ fails to parse StrokesPlus.xml, it no longer saves StrokesPlus.xml when exiting
- The Application and Action Active checks now defaults to checked for new actions
- Fixed some file opening code which should resolve the crashes people were having in 2.0.5; due to the nature of this issue, I would recommend restarting Windows first.
S+ was locking up file objects and may still have issues without a reboot..of course, if it works without a reboot, great..but in case it's crashing, try rebooting
first to make sure all file handles/objects are released.
- Reverted all DPI changes as another possible cause of the crashing issues
- If this doesn't do it, I'll have to go back to saving and refreshing the config for changes as the next step.
2.0.5 (Beta)
- Same as before, report bugs starting with [BETA].
- Added acShowSettings() to open the new settings window to whichever tab it was last at. The existing acShowPrefs(), etc. actions still function as you would expect
- Note that certain actions, especially those using acSendMessage, acPostMessage, and acSendKeys, used on the S+ window may cause very unpredictable behavior
- Set S+ as DPI-aware. This was supposed to override DPI settings and seems to do so on Win XP, but not Win 7. However, it's usable at 125% and 150% so I'm not going to pursue for now.
- Proper Settings tab is now selected when you call a action which sets a different tab as the active one and the Settings window is already open
- Do not create an action that uses the mouse wheel when Fire on mouse wheel is enabled to call acShowSetting(), it causes problems and leads to S+ not capturing gestures until re-opened
- Hopefully fixed a race condition which caused the image list in Actions and Actions Report to sometimes collide, leaving the wrong gesture thumbnail size in one of the tabs.
Turns out it didn't fix it..worst-case scenario for now, just close and re-open the window and the thumbnails should be fine...if not, let me know, otherwise I'm going to keep working on it.
- Added Action Active, Application Active, and Rule Active for Applications, Actions, and Ignored Actions. Note that if you manually tinkered with StrokesPlus.xml relating to the enabled attribute,
you could have unexpected behavior. I would recommend backing up your StrokesPlus.xml file, opening up Settings and deleting any old apps/actions and duplicates (dupes will cause very
unprediectable behavior). In theory, this shouldn't be an issue for nearly everyone, but just so it's said. Disclaimer out of the way, this new feature lets you disabled a whole app,
an action, or an ignored rule so you can keep them around but turned off. The checkboxes are in the lower right for apps/actions, and below the Global checkbox for ignored windows
- Note that the Actions Report window only shows ACTIVE actions
- Changed the logic for New/Rename/Delete Gesture to be in line with the overall Settings window Apply/OK/Cancel logic. Now, nothing changed via the Settings window nor tray menu is saved to your
config file unless you click OK in the Settings window, click OK on the Gesture Name window while in Training Mode (not while creating a new gesture from the Settings window), or Exit S+ normally.
Clicking Apply simply applies the settings in memory, but does not save your config file. This allows you to make all kinds of changes in the Settings window, but not actually commit anything
to disk unless you do one of the 3 steps listed above. This also means you can click Reload Config and Lua Engine from the tray menu to revert the settings to what's saved in your config;
again, assuming you haven't performed any of those 3 steps.
- Clicking Cancel in the Settings window reloads the config file from disk; so if you've been in and out of the window, made new gestures (via clicking New, not via Training Mode), etc. but never
performed one of the 3 steps, they will be lost since clicking Cancel would seem to indicate you want to abort all changes. However, clicking the X to close Settings does NOT perform a reload
from disk, for whatever that's worth to know. That gives you the option to Apply the setting, not save it, and not cause a reload of your config file.
- Added language.Actions.Application.Active for new checkbox
- Added language.Actions.Active for new checkbox
- Added language.Ignored.Active for new checkbox |
|
|
Rob
USA
2615 Posts |
Posted - 06/22/2012 : 16:01:51
|
| Note that in my original release of S+, I had some garbage, but disabled, apps and actions which will now popup in your Actions and Ignored tabs. Just delete them, HOWEVER, under Global Actions, there are 2 actions named "test", click one and delete it, then click OK and re-open the window to flush out the second one. |
 |
|
|
Hax
128 Posts |
Posted - 06/22/2012 : 16:40:11
|
Those nasty crashes seem to be gone. Well done! 
Rename and Delete buttons are inactive in the Ignored tab. |
|
|
|
Rob
USA
2615 Posts |
Posted - 06/22/2012 : 16:55:43
|
| Stupid copy/paste fail..will update Ignored buttons in 2.0.8. |
|
|
| |
Topic |
|
|
|
Test 2.0.7 (32-bit and 64-bit)
Forum Locked
Topic Locked
